The clocks of RDUCH BELLS & CLOCKS are characterized by the highest possible durability, resistance to weather conditions and sophisticated aesthetics. Religious buildings are usually exposed in a particular way to adverse weather conditions (winds, icing, UV rays), which is why we introduced a special line of the clocks of RDUCH BELLS & CLOCKS, in HARD version.
We mainly stress the highest quality of the clocks of RDUCH BELLS & CLOCKS. The laboratories developing new materials for us work continuously on new finishing materials or varnish coatings for the clocks. The clocks are maintenance-free.
The result of the research is the Corundum Sand Mat coating perfectly absorbing sunlight, so we have perfect mat without reflections.
In accordance with the highest standards of RDUCH BELLS & CLOCKS, the mechanisms should comply with the following assumptions:
We have all the possible structural solutions of the mechanisms, adapting them individually to each object.
Spatial clocks housings of DECOR type provide the clock with a unique and exclusive character. They greatly stand out on buildings and refer to the classical style. The housing is made with the thermoforming treatment with a very durable and weather-resistant material of ABS type, so it is light and does not load the structure. It can be painted with any colour, and in the most sophisticated taste, it can be gilded with 24 carat gold.
Diameter of clock dial A [mm] |
Diameter of clock B[mm] |
430 |
500 |
550 |
650 |
650 |
750 |
880 |
1000 |
950 |
1100 |
1400 |
1500 |
Stand-alone clocks of RDUCH BELLS & CLOCKS, otherwise also known as of a street, have all features which should be included in professional clocks. They are durable, aesthetic, work autonomously. The design of these clocks can be any in accordance with our ideas and perceptions. With CAD software, we can realistically design any clock and enter it into the environment.
Gear with lengthened needles axes
- installed to a wall
Gear with lengthened needles axes
- installed to a rack
Standard gear
- installed to the clock frame
Model |
PZN1 |
Built-in gear driver |
R-5005 |
Power supply voltage |
230V, 50Hz |
Operation temperature range |
-25ºC…+60ºC |
Maximum power consumption |
4A / 5W |
Maximum humidity |
93±3% |
Protection degree |
IP 44 |
Weight |
10 kg |
Dimensions (length x height x width) |
255 x 255 x 364 |
Model |
PZN1-S |
Built-in gear driver |
- |
Power supply voltage* |
230V, 50Hz |
Operation temperature range |
-25ºC…+60ºC |
Maximum power consumption |
2.5A / 1.7W |
Maximum humidity |
93±3% |
Protection degree |
IP 44 |
Weight |
8 kg |
Dimensions (length x height x width) |
255 x 255 x 274 |
*Voltage used in the case of the application of R-5005 tower driver
Model |
PZ1/12 |
Central gear required. |
YES |
Power supply voltage* |
230V, 50Hz |
Operation temperature range |
-25ºC…+60ºC |
Maximum humidity |
93±3% |
Protection degree |
IP 44 |
Weight |
10 kg |
Dimensions (length x height x width) |
255 x 255 x 300 |
*Voltage used in the case of the application of R-5005 tower driver
Model |
PZC1 |
Built-in gear driver |
R-5005 |
Gear handling 1:12 |
4 |
Power supply voltage |
230V, 50Hz |
Operation temperature range |
-25ºC…+60ºC |
Maximum power consumption |
4A / 5W |
Maximum humidity |
93±3% |
Protection degree |
IP 44 |
Weight |
8 kg |
Dimensions (length x height x width) |
294 x 230 x 294 |
MP-800 mechanism is the basic version of a minute-by-minute clock mechanism. It is a secondary mechanism for digits up to 800mm in diameter, covered with glass or working inside an object.
Model |
MPR-800 |
Required driver |
AK222 |
Polarised pulses voltage |
24 V |
Voltage tolerance |
±25 % |
Operation temperature range |
-25ºC…+60ºC |
Maximum humidity |
93±3% |
Protection degree |
IP 40 |
Weight |
650 g |
Dimensions (length x height x width) |
67.5 x 116 x 29 |
MP-1200 mechanism is the basic version of a minute-by-minute clock mechanism. It is a secondary mechanism for digits up to 800mm in diameter, covered with glass or working inside an object. The mechanism is equipped with an additional seconds axis.
Model |
MP-1200 |
Required driver |
AK222 |
Power supply voltage |
230V, 50Hz |
Polarised pulses voltage |
24V |
Operation temperature range |
-25ºC…+60ºC |
Maximum power consumption |
0.5A / 8W |
Maximum humidity |
93±3% |
Protection degree |
IP 44 |
Weight |
300 g |
Dimensions (length x height x width) |
67.5 x 135 x 65 |
Clock gear for special large tower clocks. The special design of the gear allows to install clock needles up to three meters long.
Model |
PZN2 |
Built-in gear driver |
R-5005 |
Power supply voltage |
230V, 50Hz |
Operation temperature range |
-25ºC…+60ºC |
Maximum power consumption |
6A / 5.2W |
Maximum humidity |
93±3% |
Protection degree |
IP 44 |
Weight |
30 kg |
Dimensions (length x height x width) |
310 x 410 x 280 |
Clock gear for special large tower clocks. The special design of the gear allows to install clock needles above three meters long.
Model |
PZN2-W |
Built-in gear driver |
R-5005 |
Power supply voltage |
230V, 50Hz |
Operation temperature range |
-25ºC…+60ºC |
Maximum power consumption |
6A / 5.2W |
Maximum humidity |
93±3% |
Protection degree |
IP 44 |
Weight |
30 kg |
Dimensions (length x height x width) |
310 x 410 x 380 |
Model |
MPR-800 |
MPR-1200 |
PZC1 |
PZN1/12 |
PZN1 |
PZN1-S |
PZN2 |
PZN2-W |
Power supply |
IMP. 24V |
IMP. 24V |
230V |
- |
230V |
230V |
230V |
230V |
Application |
Internal |
Internal or external |
||||||
Dials handling |
1 |
1 |
4 |
1 |
1 |
1 |
1 |
1 |
Diode illumination |
|
|
|
• |
• |
• |
|
|
Ø500 |
|
|
|
|
|
|
• |
• |
Ø450 |
|
|
|
|
|
|
• |
• |
Ø400 |
|
|
|
|
|
|
• |
• |
Ø350 |
|
|
|
|
|
|
• |
• |
Ø300 |
|
|
|
|
|
|
• |
• |
Ø280 |
|
|
|
• |
• |
|
• |
• |
Ø250 |
|
|
• |
• |
• |
• |
• |
• |
Ø230 |
|
|
• |
• |
• |
• |
• |
• |
Ø220 |
|
|
• |
• |
• |
• |
• |
• |
Ø200 |
|
|
• |
• |
• |
• |
• |
• |
Ø180 |
|
|
• |
• |
• |
• |
|
|
Ø160 |
|
|
• |
• |
• |
• |
|
|
Ø150 |
|
|
• |
• |
• |
• |
|
|
Ø140 |
|
|
• |
• |
• |
• |
|
|
Ø120 |
|
|
• |
• |
• |
• |
|
|
Ø100 |
|
|
• |
• |
• |
• |
|
|
Ø80 |
• |
• |
|
|
|
• |
|
|
Ø60 |
• |
• |
|
|
|
|
|
|
Ø50 |
• |
• |
|
|
|
|
|
|
Ø40 |
• |
• |
|
|
|
|
|
|
Built-in gear driver |
R-5005 |
Power supply voltage* |
230V, 50Hz |
Operation temperature range |
-25ºC…+60ºC |
Maximum power consumption |
2.5A / 1.7W |
Maximum humidity |
93±3% |
Protection degree |
IP 44 |
Weight |
600 g |
Dimensions (length x height x width) |
171 x 151 x 56 |
AK222 driver of a polarised clock is designed to work with 24V polarised mechanisms. It can support 24 mechanisms at the same time. It is compatible with DCF or GPS time pattern. The driver can be equipped with a charging system, so it can be powered and charged at night with street lighting and work on the battery during a day.
Power supply voltage |
230V, 50Hz |
Polarised pulses voltage |
24 V |
Max number of secondary clocks |
24 |
Maximum power consumption |
300 mA |
Operation temperature range |
-25ºC…+60ºC |
Maximum humidity |
93±3% |
Protection degree |
IP 65 |
Weight |
540 g |
Dimensions (length x height x width) |
72.5 x 112 x 77 |
Battery charging system |
OPTION |